Opens in a new tab

Hardware

Choose the right LED ticker display

Four ranges, one job: a band of light that reads from where people stand. Pick indoor or outdoor, straight or curved, then the height and the pitch.

The four ranges

Indoor

DX Series, 250 × 250 mm modules at 1.9, 2.5, 2.6, 2.9, 3.1, 3.9 and 5.9 mm. 800 nits and more. Front serviceable, die-cast aluminium, 47 mm deep, with seamless right-angle corners. The standard choice for receptions, bars, trading floors and club shops. → Indoor LED tickers

Outdoor

DVO Series, 480 × 240 mm modules in 960 × 960 mm cabinets at 6, 8 and 16 mm. 6,000 nits and more, IP65 front. For facades, forecourts and anything read in daylight. For a ticker behind glass, the DX HB range at 3,000 nits and more. → Outdoor LED tickers

Curved and halo

A flexible 250 mm band at 2, 2.5 or 3 mm that bends around columns, corners and rings. Halos above a turntable, ribbons round a reception, a continuous loop round an entrance. → Curved and halo LED tickers

Ticker tape

The finance and news ribbon: a long, low band along a wall or a ceiling line scrolling prices, headlines and scores from Dynamo Ticker software. → LED ticker tape displays

How to choose

Where will it be read from? The nearest reader sets the pitch. Desks two to three metres away want 1.9 to 2.5 mm. A pavement a few metres back reads 3 mm. Across a hall or a street, 3.9 mm and up. The size and pitch guide has the table.

How tall? 250 mm is the standard band: tall enough for a logo tile and two lines of text at a 1.9 mm pitch, slim enough to sit in a ceiling line. Taller bands are built from the same modules in 250 mm steps.

How long? Any length. Tickers are built from cabinets, so a 4 m window strip and an 80 m trading-floor loop use the same parts. Corners can be rigid right angles or a flexible curve.

Indoors or out? Indoor modules run at 800 nits and more. Behind a shop window facing the sun, use DX HB at 3,000 nits and more. Outside, DVO at 6,000 nits and more with an IP65 front.

What every Dynamo ticker includes

  • Design from your drawing or our survey, with resolution derived from the modules, never estimated.
  • Supply from our UK and European stock.
  • Installation by our own engineers, nationwide.
  • Commissioning with the controller and the software running before we leave.
  • Datasheets for every module we quote. The datasheet is the authority for every figure on this site.

Sizing and installing

Tell us the wall

Height, length, indoor or outdoor, and what it needs to show. We come back with a module, a pitch, a drawing and a written quote.